I-Nickel welding wire, i-ErNiCu-7, i-Monel 400/K500 yocingo lwe-Welding
I-Nickel welding Wire, i-ErNiCu-7, i-Monel 400/K500 yocingo lwe-Welding,
AWS A5.14 ErNiCu7, Monel 400/K500 Nickel Welding, ucingo lwe-nickel welding,
I-ErNicu-7 (iMonel 400/K500) iWelding Wire
♦Igama leMathiriyeli yeWelding: I-Nickel welding Wire, ErNiCu-7, iMonel 400/K500 yocingo lweWelding
♦MOQ: 15kg
♦Ifom: MIG(15kgs/spool), TIG(5kgs/box)
♦Ubungakanani: Ububanzi 0.01mm-8.0mm
♦Ubungakanani obuqhelekileyo: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM
♦Imigangatho: Ihambelana neSiqinisekiso AWS A5.14 ASME SFA A5.14
Qhagamshelana nathi ukuze ufunde ngakumbi!
ErNiCu-7 Izinto ezisekelwe kwi-Monel 400 kunye ne-Monel K500, Olu cingo lwe-welding lusetyenziselwa ukuwelda i-MONEL400 ingxubevange, i-MONELR404 ingxubevange kunye ne-MOENLK-500 ingxubevange nge-tungsten inert-gas welding, i-MGW kunye ne-arc welding ephantsi kwamanzi, kwaye ingasetyenziselwa ukuwelda ngaphezulu kwentsimbi. nge-MGW kunye ne-arc welding ephantsi.
Kucetyiswa ukuba usebenzise i-Erni-1 yokuvala ucingo lwe-nickel kwiimeko ezithile ze-welding yegesi.
I-ERNiCu-7 Ukwakhiwa kweMichiza
| C | Al | Ni | Si | Mn | P | S | Fe | Cu | Ti | Okunye |
| ≤0.15 | ≤1.25 | 62.0-69.0 | ≤1.25 | ≤4.0 | ≤0.02 | ≤0.015 | ≤2.5 | UBhal | 1.5-3.0 | ≤0.50 |
I-ERNiCu-7 Iiparamitha ze-Welding eziqhelekileyo
| Ububanzi | Inkqubo | IVolt | Amps | Irhasi yokuKhusela | |
| In | mm | ||||
| 0.035 | 0.9 | GMAW | 26-29 | 150-190 | 75% Argon + 25% Helium |
| 0.045 | 1.2 | GMAW | 28-32 | 180-220 | 75% Argon + 25% Helium |
| 1/16 | 1.6 | GMAW | 29-33 | 200-250 | 75% Argon + 25% Helium |
| 0.035 | 0.9 | GTAW | 12-15 | 60-90 | 100% Argon |
| 0.045 | 1.2 | GTAW | 13-16 | 80-110 | 100% Argon |
| 1/16 | 1.6 | GTAW | 14-18 | 90-130 | 100% Argon |
| 3/32 | 2.4 | GTAW | 15-20 | 120-175 | 100% Argon |
| 1/8 | 3.2 | GTAW | 15-20 | 150-220 | 100% Argon |
| 3/32 | 2.4 | SAW | 28-30 | 275-350 | Ukuguquguquka okufanelekileyo angasebenzisa |
| 1/8 | 3.2 | SAW | 29-32 | 350-450 | Ukuguquguquka okufanelekileyo angasebenzisa |
| 5/32 | 4.0 | SAW | 30-33 | 400-550 | Ukuguquguquka okufanelekileyo angasebenzisa |
IiPropati ze-ERNiCu-7 zoomatshini
| Imeko | Ukuqina kokuqina kweMPa (ksi) | Isivuno Amandla eMPa (ksi) | Elongation% |
| AWS reauirement | 480(70) Eqhelekileyo | Ayichazwanga ngqo | Ayichazwanga ngqo |
| Iziphumo eziqhelekileyo njengoko zidityanisiwe | 530(77) | 360(53) | 34 |
Kutheni i-ERNiCu-7?
•Akukho bushushu bufunekayo, ubushushu obuphezulu be-interpass yi-150℃ kwaye akukho PwHT efunekayo
•Izicelo zokuwelda ezingafaniyo ziquka ukudibanisa ialloys kwiNickel 200 kunye necopper-nickel alloys-
•Isetyenziswa kakhulu kwizicelo zaselwandle ngenxa yokuchasana kwayo kakuhle neempembelelo ezitshabalalisayo zamanzi olwandle kunye namanzi amdaka.
•Ingasetyenziselwa ukugqithisa kwe-MIG kwintsimbi emva komgangatho wokuqala kunye ne-nickel 208
MOQ: 15kg
Ifom: MIG(15kgs/spool), TIG(5kgs/box)
Ubungakanani: Ububanzi 0.01mm-8.0mmUbungakanani obuqhelekileyo:0.8MM/1.0MM/1.2MM/1.6MM/2.4MM/3.2MM/3.8MM/4.0MM/5.0MM
Imigangatho: Ihambelana neSiqinisekiso AWS A5.14 ASME SFA A5.14
