I-imeyile: info@sekonicmetals.com
Ifowuni: +86-511-86889860
English

I-Stellite Alloy/Stellite6/ I-Stellite 6B

Iinkcukacha zeMveliso

Amagama oRhwebo oluQhelekileyo: Ingxubevange yeCobalt 6b, iStellite Alloy, iStellite 6, iStellite 6B, i-UNS R30006,

I-Stellite Alloy 6B yi-alloy-based alloy-based alloy esetyenziswa kwi-abrasion environment, i-anti-seize, i-anti-wear and anti-friction.I-coefficient ye-friction ye-alloy 6B iphantsi kakhulu, kwaye inokuvelisa i-sliding contact kunye nezinye isinyithi, kwaye kwiimeko ezininzi ayiyi kuvelisa ukunxiba.Nokuba akukho lubricant isetyenziswayo, okanye kwizicelo apho i-lubricant ingasetyenziswa, i-alloy ye-6B inokunciphisa ukuxhuzula nokunxiba.Ukumelana nokunxiba kwe-alloy 6B kuyindalo kwaye ayithembeli kumsebenzi obandayo okanye unyango lobushushu, ngoko kunokunciphisa umthwalo wokunyanga ubushushu kunye neendleko zokucutshungulwa okulandelayo.I-alloy 6B iyamelana ne-cavitation, impembelelo, ukutshatyalaliswa kwe-thermal kunye neentlobo ezahlukeneyo ze-Corrosive medium.Kwimeko yokushisa okubomvu, i-alloy 6B inokugcina ubunzima obuphezulu (ubunzima bokuqala bunokubuyiselwa emva kokupholisa).Kwimeko enokunxitywa kunye nokubola, i-alloy 6B iyasebenza kakhulu.

       I-Stellite 6 / 6B ye-Chemical Compostations

Co BAL
Cr 28.0-32.0%
W 3.5-5.5%
Ni Ukuya kuthi ga kwi-3.0%
Fe Ukuya kuthi ga kwi-3.0%
C 0.9-1.4%
Mn Ukuya kuthi ga kwi-1.0%
Mo Ukuya kuthi ga kwi-1.5%

Iimveliso ezifumanekayo zeStellite 6B kwiiNyithi zeSekonic

Wedling Wire

I-Stellite 6/6B yocingo lwe-Welding

Supply Stellite 6/6B welding wire in coil form and cut length Form

Ibha ye-Inconel 718, inconel 625 bar

IiBar ze-Stellite 6B kunye neentonga

Ukwenziwa kwebha eRound kunye nokuphosa ibha engqukuva zombini zinokuveliswa sithi ngokwe-AMS5894

I-Nimonic 80A, i-iNCONEL 718, i-iNCONEL 625, i-incoloy 800

Stellite 6/6B Ring & Sleeve

Umsesane wesihlalo sevalve, umkhono wokuphosa unokuveliswa njengokucaciswa kwabathengi

I-Stellite 6/6B iyaqhuba :

Ngokuqhelekileyo sebenzisa izixhobo ze-carbide ze-cemented ukucubungula i-6B, kwaye ukuchaneka kwendawo yi-200-300RMS.Izixhobo ze-alloy kufuneka zisebenzise i-5° (0.9rad.) i-engile yerake enegetive kunye ne-30° (0.52Rad) okanye i-45° (0.79rad) i-lead angle.I-6B i-alloy ayifanelekanga ukucofa ngesantya esiphezulu kunye nokusebenza kwe-EDM kusetyenziswa.Ukuze kuphuculwe ukugqitywa komphezulu, ukugaya kungasetyenziselwa ukufezekisa ukuchaneka okuphezulu.Akunakucinywa emva kokugaya okomileyo, ngaphandle koko kuya kuchaphazela ukubonakala

I-Stellite 6/6B Indawo yesicelo:

I-alloy 6B ingasetyenziselwa ukwenza iinxalenye zevalvu, iipuphu zokumpompa, ii-injini zomphunga zokuvala umhlwa, iibheringi zobushushu obuphezulu, iziqu zevalvu, izixhobo zokulungisa ukutya, iivalvu zeenaliti, iimolds ezitshisayo zokukhupha, ukwenza iibrasives, njl.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    IIMVELISO EZIHLOBO